When it comes to reloading, there are a lot of procedures that have to be done. These steps, no matter how time-consuming or tedious at times, are what makes a reloader really proud of what they do. Reloading makes it possible for a reloader to customize their own ammunition. This provides satisfaction and a lot of savings in the long run compared to buying ready-made bullets. The best brass tumbler is what you should seek here.
Reloaders use tumblers in order to clean their brass. It provides an easy process where the brass is mixed with a particular type of media that when mixed together with the used brass, produces clean and polished material that is ready for the reloading process.
Importance of Using Brass Tumbler
Using brass tumblers are very easy to use. It makes the brass clean which promotes more accurate firing when in use. While there are different ways of cleaning your shells, using dry tumblers is one of the most economical, easiest and safest ways to do the job. Chemical cleaning makes use of substances wherein the brass needs to be soaked in. Although it definitely cleans the shells, it will not provide the same polished finish compared to those from tumblers.
On the other hand, cleaning the brass by hand may take more time and effort from the reloader. However, one of the best parts that you can get from it would be the ability to check them one by one for any damage which you might miss when cleaning them in bulk.
Top three Best Brass Tumbler comparison table
1. Frankford Arsenal Quick-N-Ez Tumbler
The Frankford Arsenal Quick-N-Ez Tumbler is a very common choice for a lot of reloaders. It is a motorized brass cleaning equipment that cleans thoroughly. The increased shell agitation is caused by its uniquely designed bowl. The tumbler itself does not rotate but vibrates. With this process, the brass is mixed with the media causing the media and the shells to rub against each other which later on provides a polished brass. The tumbler has to be filled with media for about 2/3, add on the brass and switch on the machine. Depending on how much cleaning you wanted, it could be for about one to three hours of cleaning time.
The tumbler has to be filled with media for about 2/3, add on the brass and switch on the machine. Depending on how much cleaning you wanted, it could be for about one to three hours of cleaning time.Frankford Arsenal Quick-N-Ez Tumbler can hold up to 600 of 9mm brass or 350 of .223 cases. It also features a cord mounted on and off switch so that it doesn’t go on automatically the moment you plug it into an outlet. It’s clear top cover makes it visibility easier as you can see what’s going on inside while it also protects the reloader from any media from scattering around the work area.
Product Features:
- On/Off Switch mounted on the cord
- Economical
- Affordable
- Holds 600 of 9mm brass
- Holds 350 of .223 brass
- Clear lid for easier visibility
- Easy to use and operate
- 1-year warranty
- Easy to handle
- Very loud noise when in operation
2. Lyman 1200 Pro Tumbler
If you are looking for a great brass cleaner that offers great features and value, the Lyman 1200 Pro Tumbler is one of the best to consider. This product is made of durable materials and is made for heavy duty work. It can hold up to 350 cases per cycle and 2 lbs of media.What makes this tumbler a great choice would be it’s built in sifter which happens to be its lid as well. This means that you don’t need to buy an additional sifter tool in order to separate the media from the brass. Its drive system also promotes better airflow to prolong its usage.
This means that you don’t need to buy an additional sifter tool in order to separate the media from the brass. Its drive system also promotes better airflow to prolong its usage.
Product Features:
- Built in sifter
- Heavy duty
- Holds 2 lbs of media
- Cleans 350 cases at a time
- Not too noisy
- Affordable
- Cleans fast
- The lid is not transparent so you cannot see the whole process
3. Hornady M2 Case Tumbler
The Hornady M2 Case Tumbler is another great product from the known producers of reloading presses. It is a heavy duty tumbler that can hold about 500 cases of .38. The tumbler has the same operating procedure just like the other brands but features an on and off switch which is very conveniently placed on the wire and functional for the reloaders. If you decide to go with the Hornady M2 Case Tumbler, you will also get a sifter that is interchangeable with the original lid. This makes it easier for you to separate the brass from the media after a few hours of cleaning time. The
If you decide to go with the Hornady M2 Case Tumbler, you will also get a sifter that is interchangeable with the original lid. This makes it easier for you to separate the brass from the media after a few hours of cleaning time. The Hornady M2 Case Tumbler also provides its users an on and off switch which lessens the need to plug and unplug the tumbler all the time if you need to pause the operation.
Product Features:
- Cleans cases thoroughly
- Includes sifter
- 500 cases of .38 per cycle
- On and off switch button
- Quiet operation
- Heavy duty tumbler
- Lid won’t allow user to see what’s inside during the process
- A bit pricey compared to other brands
When it comes to choosing the best brass tumbler, there are few things that must be considered to ensure you’re getting the most out of your purchase. Most brands offer their products for less than a $100 but that should not mean that the quality and features should be below your expectations.
One of the features to look out for would be the quality of the bowl as well as the power of the motor. These two are what makes the total of the product. Next, would be having a sifter included as a separate part or a lid that could act as one. This eliminates the need for you to buy additional accessories in order to separate your brass and media. Lastly, having a clear lid is a plus, making it visible while in operation helps the reloader to see the inside.
Final Verdict
Overall, the 3 products mentioned above offer great features and dependability. Although they may have different prices to consider, you may want to check on some features and capabilities that make one stand out from the rest. Also, during the process, it’s best to have less hand operation as much as possible. If it cannot be helped, ensure that you clean your hands well after operating to ensure safety.
Leave a Reply